Mobile command post RKP-360

RKP is intended for automated control of the components of the Neptune complex due to:

– ensuring continuous, stable, operational and covert information exchange with a given speed, quality and reliability between the components of the complex
– exchange of information with external control points of various links;
– issuing (receiving) target designation under various environmental conditions on a time scale close to real.

A set of communication tools (hereinafter – SCT) of RKP provides an open and cryptographically secure communication in the following networks:

– HF and VHF radio networks;
– satellite communications networks;
– cable networks (wired or fiber).

SCT of RKP provides:

– data exchange on the channel of the satellite communications station and wired channels using SHDSL
technology – modems in motion or in the parking lot;
– data exchange on a communication channel formed using a radio relay broadband station R-402;
– simplex telephone radio communication in the HF radio network using the HARRIS RF-7800H-MP001 radio station with a 150-W power amplifier RF-7800H-V002 while driving or in the parking lot;
– simplex telephone radio communication in VHF radio networks using the HARRIS RF-7850M-V511 radio station and in the service service VHF radio network using the Motorola DP4400 portable radio station while driving or in the parking lot;
– transmission and reception of information using a personal computer such as Dell Latitude Rugged 7414 from the workplaces of officials, including those made by satellite, radio (using Harris radio stations) and cable communication channels;
– installation of equipment B271-PE to ensure the protection of transmitted data over cable channels, satellite and radio channels;
– protection of voice information and data according to the Citadel standard transmitted via HF and VHF radio channels using Harris RF-7800H-MP and RF-7850M-V511 radio stations;
– connecting the RCP LAN to other LANs via Ethernet 10 / 100BASE-TX via field cables (S) FTP Cat 5e (Ethernet 10 / 100BASE-TX connectors in power supply), and / or via Ethernet 100BASE-FX using optical field cables (optical connector “100BASE-FX WAN1 / 2” in the power input)
– connection of analog telephones (TA) to the RCP VoIP gateway using field cable lines using the “Tlf 1” and “Tlf 2” connectors in the power supply;
– deployment and operation of one two-wire (four-wire) communication line to form an Ethernet channel using SHDSL technology;
– organization of the possibility of Ethernet-connection of remote workstations (AWP) to an open power input or a closed cable entry using the connectors “Remote workstation No. 1 / No. 2 LAN Ethernet (10/100)”;
– organization of the possibility of Ethernet-connection to a closed cable entry of external networks using Ethernet FX WAN1 / WAN2 or LAN Ethernet (10/100) connectors.